Skip to main content

Programming a Honda Hiss key

This isn't my normal post but found this page quite useful if you ever need to replace a physically broken key and programme a replacement.

Method is...  (with your new cut keys)

1. Disconnect the 2 pin wiring from the CKP sensor.
2. Connect the special wiring loom.
3. Connect the positive and negative leads to the battery.
4. Using original Key, turn the ignition on.
5. Disconnect the positive battery connector for 5 seconds then reattach.
6.  The HISS light (if you have one) should come on for 2 seconds and flash 4 times.
7. Turn off ignition and remove original key. Move well away from the HISS sensor.
8. Inset the new key and turn on the ignition. The HISS light will come on for 4 seconds and then flash 4 times. This means a the new key is registered.
9. Turn off ignition, and repeat for each new key.
10. Turn off ignition, remove special wiring loom and reconnect CKP sensor.


Here is the link

Popular posts from this blog

Awesome eagle eye headlights

Well I doubt I will ever be brave enough to buy a conversion like this but saw these and the think they look amazing. I find that a great deal of headlight conversion often look tacky and dread it when I hear of angel or demon eyes. These however seem tasteful and do seem to suit the lines of the bike.

New rear suspension link (AKA Dog Bone)

As a fan of making the CBR1000RR that little bit better, I stumbled across a shock linkage from Lee's Cycles.
The Honda CBR1000RR comes with a standard Shock linkage of 175mm. HRC provide these in different lengths (170mm-172mm) to change the handling of the bike.
The Lee's cycles link is 170mm long and is based on the HRC version at a fraction of the cost. 
HRC List 4 different links listed for the blade:
1) 52470-MFL-R10 CONN ROD ASSY., CUSHION R1 (Standard) 2) 52470-NLR-A20 CONN ROD ASSY., CUSHION (MEL) 166.2mm 3) 52470-NLR-A30 CONN ROD ASSY., CUSHION (P2) 178.8mm 4) 52470-NLR-A40 CONN ROD ASSY., CUSHION (P4) 170mm
In Brief, MEL is the most aggressive, P4 is less aggressive, P2 is quite flat and the unlisted is offers the characteristics of the P2 but adjusts ride height.
The idea in general gives better rear grip on the rear and raises the seat somewhat to transfer some weight to the front of the bike. 
Besides the obvious advantages to the handling 5mm means less material and a few…

Favourite Fireblade designs

Its always interesting to see other colour schemes for the fireblade from the usual Repsol design. 
Here are a few of my favourite colour schemes together.