Skip to main content

HRC Clutch plate configuration


I have opted for the book HRC Configuration.I have found that it worked out cheaper to buy these seperately rather than the clutch pack.

22201-NL9-C30 x 1 Friction
22201-MEL-000 x 7 Friction
22201-NLR-A30 x 1 Friction
22321-MEL-000 x 7 Steel
22321-MT3-000 x 1 Steel (Superceded with 22321-GHB-811
22322-MEL-000 x 1 Steel
22322-MN4-000 x 1 Steel (Superceded with 22321-GHB-811



In Summary the updated setup is as follows:

22201-NL9-C30 x 1 Friction
22201-MEL-000 x 7 Friction
22201-NLR-A30 x 1 Friction
22321-MEL-000 x 7 Steel
22321-GHB-811 x 1 Steel
22322-MEL-000 x 1 Steel
22321-GHB-811 x 1 Steel


I have also been given two other options:

They are based on a pack thickness of 48.5 mm

This were described as standard clutch
22201-NL9-C30 x 1 Friction (Back) Judder Spring
22322-MEL-000 x 1 Steel (Back) Judder Spring
22201-MEL-000 x 7 Friction
22201-NLR-A30 x 1 Friction (Front)

These were described as Samsung Honda Extra Friction Brands Hatch 2012

22201-MEN-670 x 8 Friction
22201-NL9-C00 x 1 Friction (Front)
22201-NL9-C30 x 1 Friction (Back)
22321-GBH-811 x 9 Steel (1.97mm)

Other plates:

22201-NL9-C00 3mm friction for use usually with a STM Slipper clutch
22321-NL9-710 1.9mm steel for use usually with a STM Slipper clutch
22322-NL9-710 2.1mm steel for use usually with a STM Slipper clutch







Popular posts from this blog

Awesome eagle eye headlights

Well I doubt I will ever be brave enough to buy a conversion like this but saw these and the think they look amazing. I find that a great deal of headlight conversion often look tacky and dread it when I hear of angel or demon eyes. These however seem tasteful and do seem to suit the lines of the bike.

New rear suspension link (AKA Dog Bone)

As a fan of making the CBR1000RR that little bit better, I stumbled across a shock linkage from Lee's Cycles.
The Honda CBR1000RR comes with a standard Shock linkage of 175mm. HRC provide these in different lengths (170mm-172mm) to change the handling of the bike.
The Lee's cycles link is 170mm long and is based on the HRC version at a fraction of the cost. 
HRC List 4 different links listed for the blade:
1) 52470-MFL-R10 CONN ROD ASSY., CUSHION R1 (Standard) 2) 52470-NLR-A20 CONN ROD ASSY., CUSHION (MEL) 166.2mm 3) 52470-NLR-A30 CONN ROD ASSY., CUSHION (P2) 178.8mm 4) 52470-NLR-A40 CONN ROD ASSY., CUSHION (P4) 170mm
In Brief, MEL is the most aggressive, P4 is less aggressive, P2 is quite flat and the unlisted is offers the characteristics of the P2 but adjusts ride height.
The idea in general gives better rear grip on the rear and raises the seat somewhat to transfer some weight to the front of the bike. 
Besides the obvious advantages to the handling 5mm means less material and a few…

Favourite Fireblade designs

Its always interesting to see other colour schemes for the fireblade from the usual Repsol design. 
Here are a few of my favourite colour schemes together.