Skip to main content

2013 Season gets underway in Qatar



Tonight under the floodlights of the Losail circuit in Qatar, the 2013 MotoGP season began.

Repsol Honda's Dani Pedrosa and Marc Marquez made the most of the 45minute FP1 session on a very dirty track. Rookie Marc overcame his initial nerves and took the 4th fastest time of the session with 1'57.276 recorded on lap 15 of 18. Dani, who had issues with corner entry, was 8th fastest with a 1'57.749 on his final lap of 17. Both riders remained on the same tyre for the session.

 

Marc Marquez       4th       1'57.276
"The truth is that I was a little nervous -above all at the start,- but that's normal. I got over that immediately and set about the practice just like we did in Moto2 last season: Working hard with a focus on the race. I made steady improvement and felt good, which is important at the start but we must remember that this is just the beginning. The grip levels improve a lot during a GP weekend, and thus we will have to keep working on the setup"
 

Dani Pedrosa       8th       1'57.749
"Today wasn't our best day. We weren't able to ride well with the bike, because I had a little issue on corner entry. That's why we didn't get better lap times. We hope that things go better tomorrow and that we can get better one-off times again"

Popular posts from this blog

Awesome eagle eye headlights

Well I doubt I will ever be brave enough to buy a conversion like this but saw these and the think they look amazing. I find that a great deal of headlight conversion often look tacky and dread it when I hear of angel or demon eyes. These however seem tasteful and do seem to suit the lines of the bike.

New rear suspension link (AKA Dog Bone)

As a fan of making the CBR1000RR that little bit better, I stumbled across a shock linkage from Lee's Cycles.
The Honda CBR1000RR comes with a standard Shock linkage of 175mm. HRC provide these in different lengths (170mm-172mm) to change the handling of the bike.
The Lee's cycles link is 170mm long and is based on the HRC version at a fraction of the cost. 
HRC List 4 different links listed for the blade:
1) 52470-MFL-R10 CONN ROD ASSY., CUSHION R1 (Standard) 2) 52470-NLR-A20 CONN ROD ASSY., CUSHION (MEL) 166.2mm 3) 52470-NLR-A30 CONN ROD ASSY., CUSHION (P2) 178.8mm 4) 52470-NLR-A40 CONN ROD ASSY., CUSHION (P4) 170mm
In Brief, MEL is the most aggressive, P4 is less aggressive, P2 is quite flat and the unlisted is offers the characteristics of the P2 but adjusts ride height.
The idea in general gives better rear grip on the rear and raises the seat somewhat to transfer some weight to the front of the bike. 
Besides the obvious advantages to the handling 5mm means less material and a few…

Favourite Fireblade designs

Its always interesting to see other colour schemes for the fireblade from the usual Repsol design. 
Here are a few of my favourite colour schemes together.