Skip to main content

Positive steps in Mugello Test for Repsol Honda Team

After three demanding weeks, with consecutive races in the Netherlands, Germany and Italy, the Repsol Honda Team have concluded with a positive day of testing at the Mugello circuit.

The Honda factory team were back on track this morning to test a new engine and a new prototype that HRC has developed, aiming improve performance of the RC213V.

Dani Pedrosa did 51 laps with a best time of 1'47.549, two tenths under the circuit record he set in Sunday's race (1'47.705) and Casey Stoner completed 47 laps with a fastest time of 1'47.551, just two thousandths off his team mate.

Both riders reported some positive feedback and the HRC engineers now have valuable data from the factory riders to take back to Japan for evaluation.

The Repsol Honda Team can now enjoy a small break before taking to the track in Laguna Seca for the US Grand Prix on the 29th July.
DANI PEDROSA 2nd 1'47.549
"We tested many things today and I'm happy because we found some positives with the new engine and also with the new chassis that can help us in the second part of the season. I was really hoping for some improvements after the issues we have had with the extra weight, chattering and the front tyres and in this test we made a step forward. Honda is working very hard and I'm sure they will do their best to be able to supply us the new parts for Laguna and the following races, but we'll see if it's possible with the engine allocations; anyway, it would be very good for us. The engine is better into the corner, the engine brake is smoother and the bike is not so sharp when you close the throttle, so this helps you to get into the corner. I made my best lap time on my current bike; it's normal as I'm used to it. With the new bike I made a mistake shifting gears and I had a small crash on my third lap, so I couldn't do a longer run, but the feeling was also positive".
CASEY STONER 3rd 1'47.551
"We had a new engine and new chassis to test today. With the engine we found some improvements, a little smoother and some more power. As far as chassis goes I didn't find any real benefits, we tried many different things but couldn't get a better feeling. There were a few small areas that improved but nothing in terms of performance or for the lap time, just a marginally better feeling under braking. It wasn't really the test we were looking for, we had hoped to find something to help us get rid of the chatter and give us some more feeling in the middle of the corner but unfortunately we didn't find this. If we can have the new engine with the current chassis, it's the best combination, but we're not sure if we can have it in time for La guna Seca, we'll have to wait and see".
SHUHEI NAKAMOTO - HRC EXECUTIVE VICE PRESIDENT
 "Both riders gave positive feedback with the new engine and we will do our best to provide it to them already next week in Laguna Seca. The new chassis has good points and bad points. Dani seems to like it and we will do our best to bring it for him at the next round. Casey doesn't find what he was looking for in this new chassis; to reduce the chatter. We have some more ideas to solve this and we will continue working to improve our machine but we can be reasonably happy of today's result".

Popular posts from this blog

Awesome eagle eye headlights

Well I doubt I will ever be brave enough to buy a conversion like this but saw these and the think they look amazing. I find that a great deal of headlight conversion often look tacky and dread it when I hear of angel or demon eyes. These however seem tasteful and do seem to suit the lines of the bike.

New rear suspension link (AKA Dog Bone)

As a fan of making the CBR1000RR that little bit better, I stumbled across a shock linkage from Lee's Cycles.
The Honda CBR1000RR comes with a standard Shock linkage of 175mm. HRC provide these in different lengths (170mm-172mm) to change the handling of the bike.
The Lee's cycles link is 170mm long and is based on the HRC version at a fraction of the cost. 
HRC List 4 different links listed for the blade:
1) 52470-MFL-R10 CONN ROD ASSY., CUSHION R1 (Standard) 2) 52470-NLR-A20 CONN ROD ASSY., CUSHION (MEL) 166.2mm 3) 52470-NLR-A30 CONN ROD ASSY., CUSHION (P2) 178.8mm 4) 52470-NLR-A40 CONN ROD ASSY., CUSHION (P4) 170mm
In Brief, MEL is the most aggressive, P4 is less aggressive, P2 is quite flat and the unlisted is offers the characteristics of the P2 but adjusts ride height.
The idea in general gives better rear grip on the rear and raises the seat somewhat to transfer some weight to the front of the bike. 
Besides the obvious advantages to the handling 5mm means less material and a few…

Favourite Fireblade designs

Its always interesting to see other colour schemes for the fireblade from the usual Repsol design. 
Here are a few of my favourite colour schemes together.