Skip to main content

Double front row start for Repsol Honda Team in Laguna Seca


Casey Stoner and Dani Pedrosa qualified second and third respectively for tomorrow's Red Bull US Grand Prix and it's the fifth time this season the riders share the first row of the grid.

It was a very busy session for both Repsol Honda riders after they sat out the morning's free practice due to the fog and cold temperatures at Laguna Seca.

Casey spent most of the session working on hard tyres and kept the softer slicks for the last five minutes, when he managed to improve his lap times by almost half a second and take second place on the grid with 1'20.628, just 0.074 second from the pole.

Dani, instead, went out with the soft rear on his first exit and set a fast lap time of 1'20.906 that secured him the third slot before start working on race pace.

Casey, who will use the new engine, and Dani, who has chosen the new engine and chassis for tomorrow's race, are confident to fight in front and maintain a high pace in the tough 32 lap race.
CASEY STONER 2nd 1'20.628
"I'm disappointed as I think we definitely had the potential for pole position. We spent most of the session with the hard tyre trying to improve our pace, we've been struggling with it all season when the temperatures aren't high enough to get it working and we had made a few steps and weren't too far off the pace. Then we put on the soft tyre and unfortunately we never got a clean lap. There was always a CRT bike in the way and considering we're 3-4 seconds a lap quicker than them, you come up on them pretty quick, no matter how big a gap you give them. Every lap was spoiled which is very frustrating as I really feel we could have been on pole but we'll have to settle for where we are. Tyre choice for the race will depend on the weather conditions tomorrow, I think we have the pace and longevity in the tyre for the soft, but if it's hot then we may have to try and make the hard work".
DANI PEDROSA 3rd 1'20.906
"I was a little upset at the end of the session as I wasn't able to improve my lap time, but happy anyway with another front row. We did a big job this afternoon, considering this morning, in my opinion, there was no meaning to go out with such a track and weather conditions. So we had one hour to work with the tyres and set up the new bike that I finally chose for the race. It was an intense and interesting practice; we know what we have to do for tomorrow. The bike is working well and I'm pretty confident for the race. Let's see if we have better conditions than today for the warm up tomorrow and we can work on the finer details, although I think we have already a good package".

Popular posts from this blog

Awesome eagle eye headlights

Well I doubt I will ever be brave enough to buy a conversion like this but saw these and the think they look amazing. I find that a great deal of headlight conversion often look tacky and dread it when I hear of angel or demon eyes. These however seem tasteful and do seem to suit the lines of the bike.

New rear suspension link (AKA Dog Bone)

As a fan of making the CBR1000RR that little bit better, I stumbled across a shock linkage from Lee's Cycles.
The Honda CBR1000RR comes with a standard Shock linkage of 175mm. HRC provide these in different lengths (170mm-172mm) to change the handling of the bike.
The Lee's cycles link is 170mm long and is based on the HRC version at a fraction of the cost. 
HRC List 4 different links listed for the blade:
1) 52470-MFL-R10 CONN ROD ASSY., CUSHION R1 (Standard) 2) 52470-NLR-A20 CONN ROD ASSY., CUSHION (MEL) 166.2mm 3) 52470-NLR-A30 CONN ROD ASSY., CUSHION (P2) 178.8mm 4) 52470-NLR-A40 CONN ROD ASSY., CUSHION (P4) 170mm
In Brief, MEL is the most aggressive, P4 is less aggressive, P2 is quite flat and the unlisted is offers the characteristics of the P2 but adjusts ride height.
The idea in general gives better rear grip on the rear and raises the seat somewhat to transfer some weight to the front of the bike. 
Besides the obvious advantages to the handling 5mm means less material and a few…

Favourite Fireblade designs

Its always interesting to see other colour schemes for the fireblade from the usual Repsol design. 
Here are a few of my favourite colour schemes together.